MIL-STD-867 Temper Etch InspectionThis standard establishes requirements and test for performing temper etch inspection of carburized steels and tool and low alloy steels, which are heat treated above 1.24 x 109 Pascal PA 1.26 x 102 kilogram - force/square millimeter Kgf/mm2 or 1.8 x 105 pound - force/square inch psi. This standard applies to aircraft and missiles structural and propulsion system components when MIL-HDBK-6870 for guidance only and/or MIL-STD-866 are reference documents in the solicitation or contract.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

MIL-STD-867C

cautioned that they must meet all specified requirements of documents cited in sections

3, 4, and 5 of this standard, whether or not they are listed.

2.2   Government documents.

2.2.1    Specifications, standards, handbooks, and commercial item descriptions. The following specifications, standards, handbooks, and commercial item descriptions form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-16173                      Corrosion Preventive Compound Solvent

Cutback, Cold Application

(Copies of these documents are available online at https://assist.daps.dla.mil or  from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA  19111-5094.)

2.2.2   Other Government documents, drawings, and publications.   The following other Government documents, drawings, and publications form a part of this document

to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

COMMERICAL ITEM DESCRIPTIONS

A-A-59105                  Nitric Acid, Technical

A-A-59281                  Cleaning Compound, Solvent Mixtures

(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA  19111-5091.)

CODE OF FEDERAL REGULATIONS (CFR)

27CFR 21.35              Formula 3-A

(Copies of this document are available online at www.access.gpo.gov/nara/cfr or from the Superintendent of Documents, U.S. Printing Office, North Capitol & "H" Streets, N.W., Washington D.C. 20402-0002.)

2.3    Non-Government standards and publications.   The following documents form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE) SAE-AMS-H-6875      Heat Treatment of Steels, Raw Materials

2