MIL-STD-410E
5.6.4 Recertification. Level I and II personnel shall be recertified at intervals not to exceed three years. Level III personnel shall be recertified at intervals not to exceed 5 years. The physical and practical examinations, equivalent to those required for initial certification, shall be given prior to recertification. The extent to which the individual's knowledge of the general and specific examination subject areas is examined shall be determined by the Level III responsible for the employer's certification program and shall be documented in the individuals certification records.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Level I Special. The Level I designation in this revision is equivalent to the Level I Special designation of MIL-STD-41OD. The MIL-STD-41OD Level I Special was limited to the ultrasonic and eddy current methods. Experience has shown that the
Level I Special designation is an effective way of designating the entry level certification for nondestructive inspection and that it should be allowed a for all methods; thus the change was made in this revision. Because of the increased responsibilities assigned to the Level I, minimum required classroom training hours are not specified (see table I).
6.2 Intended use. When invoked in a Request for Proposal (RFP), Invitation for Bid (IFB), of other similar document, the contracting agency should request that a copy of the offeror's existing qualification/certification procedure for NDI or NDT personnel be included with the technical proposal. If the offeror has no existing procedure or if the existing procedure does not comply with this standard, then the contracting agency should request that the offeror's approach for establishing a procedure that complies with this standard be included in the technical proposal. In addition, if the contacting agency intends that personnel using methods other than those listed in paragraph 1.2.1 be qualified and certified to this standard, then details on the offeror's approach to conducting such an effort should be requested as part of the technical proposal.
6.3 Subject term (key word) listing.
Acoustic emission
Certification
Eddy current Liquid penetrant Magnetic particle Neutron radiography Nondestructive testing Qualification Radiography Ultrasonic
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business