API-STD-2550 - Cylindrical Tank, Upright, Standard Method For Measurement & Calibration Of
This standard describes the procedures for calibrating upright cylindrical tanks larger than a barrel or drum.
IEEE400 - Making High-Direct-Voltage Tests On Power Cable Systems In The Field, Ieee Guide For
This guide presents procedures and recommended test voltage values for acceptance and maintenance high-direct-voltage testing of shielded power cable systems.
MIL-C-6021 - Casting, Classification And Inspection Of (S/S By Mil-Std-2175)
MIL-DTL-19595 - Magnetic Effect Limits For Non-Magnetic Equipment Used In The Proximity Of Magneitc Influence Ordnance
This specification covers the magnetic effect limits and testing methods for nonmagnetic equipment used in the proximity of magnetic influence ordnance.
MIL-G-62454 - Gear Bevel, Inspection Of (S/S By Ansi/Agma-2000)
This specification covers the methods of measurement and requirements for acceptance of the fundamental efforts for straight, zerol, and spiral bevel gears when the control is based upon the use of master gears. The manufacture of bevel gears, particularly precision and those requiring utmost quietness in operation, depends vitally on a careful inspection procedure. Because of the complex configuration in bevel gears and the need for conjugate tooth action, it is necessary that diligent inspection be carried out through the whole manufacturing process.
MIL-HDBK-1890 - Inspection of Welded Joints
This handbook gives guidance for nondestructive inspection of welded joints. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.
MIL-HDBK-333 - Handbook For Standardization Of Nondestructive Of Nondestructive Testing Methods Volume 1 And 2 (S/S By Mil-Hdbk-728/1, 728/2, 728/3, 728/4, 728/5)
MIL-HDBK-54 - Electromagnetic Testing For (Inspection Of Material) (S/S By Mil-Hdbk-28)
MIL-HDBK-55 - Radiographic Nondestructive Testing Series (S/S By Mil-Hdbk-728/1)
MIL-HDBK-726 - Ultrasonic Testing (S/S By Mil-Hdbk-728)
MIL-HDBK-728/1 - Nondestructive Testing
Although this handbook is provided as a guide to all those employed in nondestructive test (NDT), it will be of specific interest to administrators, designers, production engineers, quality assurance personnel, and nondestructive test engineers and technicians. It has been formulated to cover both broad and specific applications of NDT, so as to satisfy individuality, as well as conformity, of interests and knowledge among the division of responsibility in NDT.
MIL-HDBK-728/2 - Eddy Current Testing
MIL-HDBK-728/3 - Liquid Penetrant Testing
MIL-HDBK-728/4 - Magnetic Particle Testing
This document is intended to provide information on the use of magnetic particle testing and inspection both broad and specific applications.
MIL-HDBK-728/5 - Radiographic Testing
This handbook provides the fundamental principles and guides associated with radiologic testing.
MIL-HDBK-728/6 - Ultrasonic Testing
MIL-HDBK-731 - Nondestructive Testing Methods Of Composite Materials - Thermography
This is the first volume of a nine volume series on nondestructive testing of composite materials. Each volume is designed to provide an overview of the general method. This volume contains an overview of techniques available for the application of thermographic nondestructive testing and evaluation techniques. General information on contact and noncontact methods of temperature measurement are discussed as these pertain directly to thermography. Special emphasis is placed on noncontact, infrared methods as these can be used for real-time observations. Practical information on the procedures which have proven useful for application if thermography to composites is discussed in some detail. In addition, present equipment which is available commercially for such tests and important test parameters which must be selected for proper observations and interpretations are discussed.
MIL-HDBK-732 - Nondestructive Testing Methods Of Composite Materials Acoustic Emission
This handbook is one of four handbooks to be used for the nondestructive testing of composites.
MIL-HDBK-733 - Nondestructive Testing Methods Of Composite Materials - Radiography
This document is intended to provide information on radiographic techniques for examining discontinuities found in many type of reinforced composites.
MIL-HDBK-786 - Field Assurance Of Acoustic Emission System Operation Using Simulated Acoustic Emission Events
This handbook provides a procedure for assuring the proper operation of an acoustic emission system installed on a field test article. This handbook allows the user: 1. to insure that no degradation of performance has occurred from the laboratory sensor/system calibration upon arrival at the test site: 2. to check for proper sensor installation and coupling to the test article before the test; 3. to provide a method for adjusting all system channels to similar sensitivity levels prior to testing; and 4. to detect any performance changes during the test due to electronic malfunctions or sensor coupling problems.
MIL-HDBK-787 - Nondestructive Testing Methods Of Composite Materials - Ultrasonic
This document is intended to provide information on using ultrasound to study several types of discontinuities found in various composite materials. The fundamentals of ultrasonics are not included as this type of information is available in MIL-HDBK-786/6.
MIL-I-46175 - Inspection And Testing Of Ductile Cast Iron Grade 100-70-03, Ultrasonic
This specification contains general and specific requirements and governs the procedure for 100% nondestructive inspection and attainment of improved mechanical properties of ductile cast iron through flaw size control and acceptable graphite form requirements.
MIL-HDBK-6870 - Nondestructive Inspection Program Requirements for Aircraft and Missile Materials and Parts
This handbook provides guidance to government personnel and contractors for defining the requirements for establishing an acceptable Nondestructive Inspection (NDI) program for the development, production, and sustainment phases of DoD aircraft and missile structural components when directly referenced in the item specification contract or order. This handbook is for guidance only and cannot be cited as a requirement.
MIL-I-83387 - Inspection Process, Magnetic Rubber (S/S By Sae-Ams-I-83387)
This specification covers the general procedural requirements necessary for the performance of magnetic rubber inspection.
MIL-I-8950 - Inspection, Ultrasonic, Wrought Metals, Process For (S/S By Mil-Std-2154)
MIL-M-11472 - Magnetic-Particle Inspection, Process, For Ferromagnetic Materials (S/S By Mil-Std-1949)
MIL-M-11473 - Magnetic Particle Inspection, Soundness Requirements For Weldments (S/S By Astm-E125)
MIL-M-47230 - Magnetic Particle Inspection: Soundness Requirements For Materials, Parts, And Weldments (S/S By Mil-Std-1907)
This specification describes the defect limits allowed under three quality level classifications for the magnetic particle inspection of ferromagnetic forgings, castings, tubes, sheets, bars, etc. in the following fabrication stages: a. Unmachined or unwelded parts or materials. b. Machined parts. c. Weldments: for purposes of this specification, the term weldment refers to deposited filler metal and areas of base metal adjacent thereto which are likely to be affected by the welding operation.
MIL-N-17387 - Nonmagnetic Inspection Procedure For Wrought Austenitic Steel (S/S By Mil-Std-288)
MIL-P-47158 - Penetrant Inspection, Soundness Requirements For Materials, Parts And Weldments (S/S By Mil-Std-1907)
MIL-R-11468 - Radiographic Inspection, Soundness Requirements For Arc & Gas Welds In Steel (S/S By Mil-Std 1264)
MIL-R-11469 - Radiographic Inspection, Classification & Soundness Requirement For Steel Casting (S/S By Mil- Std-1265)
MIL-R-11470 - Radiographic Inspection: Qualification Of Equipment, Operators And Procedures (S/S By Mil-Std-453)
This specification covers methods for the qualification of equipment, operators and procedures for industrial radiographic inspection.
MIL-R-45226 - Radiographic Inspection Of Graphite
MIL-R-45774 - Radiographic Inspection, Soundness Requirements For Fusion Welds In Aluminum And Magnesium Missile Components
This specification covers the methods for defining soundness and freedom from defects of manual or automatic shielded inert gas arc welds in aluminum and magnesium as determined by radiographic inspection.
MIL-STD-1166 - Radiographic Testing Requirements For Solid Propellants
This standard covers the requirements for quality level and testing sensitivity in radiographic inspection of solid propellants to determine the presence of unacceptable voids and other discontinuities.
MIL-STD-1257 - Radiographic And Visual Soundness Requirements For Cobalt-Chromium Alloy Liners (For Small Arms Barrels)
MIL-STD-1263 - Qualification & Certification Ofinspection Personnel (Ultrasonics) (S/S By Mil-Std-410)
MIL-STD-1264 - Radiographic Inspection For Soundness Of Welds In Steel By Comparison To Graded Astm E390 Reference Radiographs (S/S By Mil-Hdbk-1264)
This standard prescribes requirements for radiographic inspection for soundness of welds in steel by comparison to selected levels of ASTM-E-390 reference radiographs.
MIL-STD-1265 - Radiographic Inspection, Classification And Soundness Requirements For Steel Castings (S/S By Mil-Hdbk-1265)
MIL-STD-139 - Radiographic Inspection, Soundness Requirements For Aluminum And Magnesium Castings (For Small Arms Parts)
This standard covers the radiographic inspection of aluminum and magnesium sand, investment, permanent mold, and die castings.
MIL-STD-1537 - Electrical Conductivity Test For Verification Of Heat Treatment Of Aluminum Alloys, Eddy Current Method
This standard contains procedures for verifying aluminum alloy heat treatment by means of eddy current techniques, which measure electrical conductivity. Aluminum alloy heat treatment can be verified when electrical conductivity measurements are used in conjunction with hardness measurements.
MIL-STD-1570 - Oil Analysis In Equipment Design, Provisions For
The purpose of this standard is to ensure that provisions for the Oil Analysis Program (OAP) are included in the design, development, and fabrication of equipment employing lubrication fluids in enclosed aeronautical and nonaeronautical mechanical systems.
MIL-STD-1699 - Nondestructive Evaluation Of Butt Welds In Crane And Railroad Rails
This procedure describes the requirements for the nondestructive evaluation of butt welds in crane and railroad rails using visual and ultrasonic inspection techniques.
MIL-STD-1875 - Ultrasonic Inspection, Requirements For
MIL-STD-1879 - Compressor Rotor Blades, Gas Turbine Tank Engine, Processing, Inspection, And Identification Of
Purpose of this standard is to insure gas turbine tank engine compressor rotor blades meet prescribed identificaiton and acceptance criteria.
MIL-STD-1890 - Welded Joints, Inspection Of (S/S By Mil-Hdbk-1890)
This standard covers the requirements for the nondescructive inspection of the five basic types of welded joints and modifications used in the manufacture of gas turbine tank engine components.
MIL-STD-1891 - Bolts And Screws, Inspection Of
This standard covers processing procedures and operations for forming bolts and screws and inspection and test procedures for the finished product.
MIL-STD-1894 - Radiographic Reference Standards And Radiographic Procedures For Partial-Penetration Steel Welds
This standard provides standard reference radiographs and recommended radiographic inspection procedures for partial-penetration weldments in steel plate, casting, or forging, 0.5 to 2 inches (in.) (12.70 to 50.80 millimeters (mm)) thick.
MIL-STD-1895 - Radiographic Reference Standards And Radiographic Procedures For Partial-Penetration Aluminum Welds
This standard provides standard refernce radiographs and recommended radiographic inspection procedures for partial-penetration weldments in aluminum plate, casting, or forging, 0.5 to 2 inches (in.) (12.70 to 50.80 millimeters (mm)) thick.
MIL-STD-1896 - Joints, Brazed, Inspection Of
Inspection of brazed joints is performed to detect discontinuities which may lessen the integrity of the brazed parts.
MIL-STD-1899 - Pressure Testing, 10 Psi Through 200 Psi (For Guidance Only Use Mil-Hdbk-1899)
This standard covers the classification, requirements, and procedures for air or hydraulic leak testing of casting, parts, or assemblies at 10 through 200 pounds per square inch gage (psig) by using the appropriate documents listed below.
MIL-STD-1945 - Glossary Of Terms And Definitions For Acoustic Emission Testing Procedures
The terminology in this standard for acoustic emisson test method and procedures is intended for use on drawings, and in specifications, standards, and technical documents.
MIL-STD-1948 - Glossary Of Terms And Definitions For Neutron Radiographic Testing
The terminology in thisstandard for neutron radiographic methods and procedures is intended for use on drawings, and in specifications, standards, and technical documents.
MIL-STD-1949 - Inspection, Magnetic Particle (S/S By Astm-E1444)
MIL-STD-2032 - Eddy Current Inspection Of Heat Exchanger Tubing On Ships Of The United States Navy (See Notice 1 For Replacement Information)
MIL-STD-2035 - Nondestructive Testing Acceptance Criteria
MIL-STD-2132 - Nondestructive Examination Requirements For Special Applications (With Change Notice Included)
This standard covers the requirements for conducting nondestructive examinations. It also contains the minimum requirement for qualification of nondestructive examination personnel, procedures, and nondestructive examination equipment.
MIL-STD-2154 - Inspection, Ultrasonic, Wrought Metals, Process For (S/S By Astm-E2375 And Sae-Ams-Std-2154)
The purpose of the military standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.
MIL-STD-2175 - Castings, Classification And Inspection Of (S/S By Sae-Ams-Std-2175)
The purpose of this military standard is to prescribe the non-destructive testing acceptance criteria for the inspection of metal castings that are classified (see 1.3) in accordance with this standard.
MIL-STD-2192 - Nickel-Chromium-Iron Alloy Microstructure Procedure Requirements And Acceptance Criteria
This standard establishes the procedure requirements and acceptance criteria for the examination of nickel-chromium-iron alloy (Alloy 600) microstructure.
MIL-STD-271 - Requirements For Nondestructive Testing Methods (Replacement Document Navsea Tech Pub T9074-As-Gib-010/271)
This standard covers the requirements for conducting nondestructive tests used in determining the presence of surface and internal discontinuities in metals.
MIL-STD-288 - Inspection Procedure For Determining The Magnetic Permeability Of Wrought Austenitic Steel (S/S By Mil-Std-2142)
This standard describes the general methods of sampling examining, and testing solid propellants.
MIL-STD-369 - Glossary Of Terms And Definitions For Radiographic Testing (S/S By Astm-E1316)
The terminology in this standard for radiographic methods and procedures is intended for use on drawings, and in specifications, standards, and technical documents.
MIL-STD-370 - Visual Acceptance Criteria For Inspection Of Aluminum Alloy Welds (See Notice 2 For Replacement Information)
This standard provides visual acceptance criteria for fusion welding of aluminum alloys made by any of the following processes: Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding (GMAW), Electron Beam Welding (EBW), Plasma Arc Welding (PAW), and Shielded Arc Welding (SMAW).
MIL-STD-371 - Glossary Of Terms And Definitions For Ultrasonic Testing Procedures (S/S By Astm-E1316)
The terminology in this standard for ultrasonic test methods and procedures is intended for use on drawings, and in specifications, standards, and techncal documents.
MIL-STD-40006 - Chromium Plate; Visual Inspection Of (Metric)
The purpose of this standard is to supplement the quality assurance provisions of AMS 2406 for visual inspection of parts finished by chromium electrodeposition.
MIL-STD-410 - Nondestructive Testing Personnel Qualification And Certification (See Nas410 As A Possible Replacement)
This standard establishes the minimum requirements for the qualification and certification for personnel involved in the application of nondestructive inspection (NDI) or nondestructive testing (NDT) personnel. These requirements include training, experience and examination.
MIL-STD-453 - Inspection, Radiographic (S/S By Astm-E1742)
MIL-STD-6866 - Inspection, Liquid Penetrant (S/S By Astm-E1417)
MIL-STD-746 - Radiographic Testing Requirements For Cast Explosives
MIL-STD-770 - Ultrasonic Inspection Of Lead
MIL-STD-779 - Reference Radiographs For Steel Welds (S/S By Astm-E390)
MIL-STD-779-2 - Reference Radiographs For Steel Welds (S/S By Astm-E390)
MIL-STD-779-3 - Reference Radiographs For Steel Welds (S/S By Astm-E390)
MIL-STD-867 - Temper Etch Inspection
This standard establishes requirements and test for performing temper etch inspection of carburized steels and tool and low alloy steels, which are heat treated above 1.24 x 109 Pascal (PA) (1.26 x 102 kilogram - force/square millimeter (Kgf/mm2) or 1.8 x 105 pound - force/square inch (psi). This standard applies to aircraft and missiles structural and propulsion system components when MIL-HDBK-6870 (for guidance only) and/or MIL-STD-866 are reference documents in the solicitation or contract.
MIL-U-81055 - Ultrasonic Inspection, Immersion, Of Wrought Metal, General Specification For (For Torpedo Mk 46 Mod 0)
NFPA-T2.12.1 - Fluid Power, Hydraulic - Systems And Products - Method Of Measuring Average Steady - State Pressure
This standard is limited to the measurement of average steady-state static pressure in a closed conductor meeting
NFPA-T2.12.10 - Hydraulic Fluid Power - Systems And Products - Testing General Measurement, Principles And Techniques - Recommended Practice
Use of this recommended practice shall be limited to measurement situations encountered in the testing of hydraulic fluid power components or systems under static or averge steady state conditions.
- Instrument Lighting, Electroluminescent General Specification For
MIL-I-27848 - Indicator, Horizontal Situation Aqu-4/A
This specification covers the requirements for one type of horizontal situation indicator, designated AQU-4/A.
MIL-I-2947 - Instruments, Gyro-Compass, Rotor-Balancing
MIL-I-6424 - Indicator, Induction Compass, Type V-8
MIL-I-83034 - Indicator, Horizontal Situation Aqu-6/A
This specification covers the requirements for one type of horizontal situation indicator, designated AQU-6A/A.
MIL-L-1197 - Logs, Taffrail
MIL-M-2711 - Magnetic Sets, Compass Outfit
MIL-N-27632 - Navigation Set, Astro An/Avn-1
MIL-N-3451 - Navigation Set, Land, Vehicular: Dead Reckoning, Packaging Of
This specification covers the requirements for the preservation, packing, and marking of Navigation Set, Land, Vehicular: Dead Reckoning, SC 6605-97-CL-E01 (NSN 6605-00-264-3922).
MIL-N-52549 - Navigation Set, Land, Vehicular (Gyrocompass Automatic Navigation System)
MIL-P-1185 - Peloruses, Illuminated And Nonilluminated
MIL-P-11977 - Packaging Of Compasses, Prismatic M1918 And M2
MIL-P-15418 - Plotting Board, Tactical Display (Synchro, 24 Inch)
MIL-P-18987 - Plotting Board, Tactical Display Pt-396/As
The equipment covered by this specification shall be mount in a military aircraft to receive ground track data in the form of synchro voltages from a ground position computer, and to present a continuous and/or permanent record of the aircraft's track on a chart or plotting sheet.
MIL-P-19461 - Plotting Board, Tactical Display, Pt-429/A
This equipment covered by this specification shall be capable of receiving inputs fro a Ground Position Indicator in the form of signals representing North-South and East-West ground miles traveled and True Heading and shall be capable of displaying this information visually.
MIL-P-21381 - Plotting Boards, Ship' S Status And Tactical Display (Naval Shipboard Use)
This specification covers plotting boards for use in combat information centers or similar spaces in Naval ships.
MIL-P-23141 - Plotting Table, Anti-Submarine And Dead Reckoning (Naval Shipboard)
This specification covers the design of the anti-submarine and dead reckoning plotting table for use in combat information centers or similar spaces in Naval ships during anti-submarine or other similar tactical situations.
MIL-P-81418 - Plotter, Map Display Pt-489/Asq-104
MIL-P-87133 - Plotter Combat Mission, Plu-6/C (Air Navigation)
This specification covers one type of combat mission plotter that is designated PLU-6/C.
MIL-PRF-10436 - Compass, Magnetic, Unmounted: Lensatic, Luminous, 5 Degree And 20 Mil Graduations, With Carrying Case
This specification covers an induction-damped, lensatic, unmounted, magnetic compass, with 5 degree and 20 mil graduations, for individual use during day and nighttime.
MIL-PRF-17850 - Compass, Magnetic, Pocket
This specification covers a compass, magnetic, pocket for emergency use.
MIL-PRF-38214 - Compass, Magnetic, Mounted
This specification covers the requirements for four types of integrally-lighted, flange-mounted, pilot's standby magnetic compasses (see 6.4.7).
MIL-R-24177 - Repeater, Multi-Speed, 3-Channel, Navigation System
This specification covers the multi-speed repeater foe use in the navigation subsystem.
MIL-S-1199 - Stadimeter
MIL-S-17315 - Stabilization Equipment, Gyro Stabilizer
MIL-S-21639 - Sextant, Bubble Aqu-1/A
The equipment covered by this specification shall be a type of Bubble Sextant, AQU-1/A, for use in military aircraft.
MIL-S-2387 - Sextant, Marine, Mark Ii (S/S By Mil-S-24656)
MIL-S-23960 - Sextant, Type Iii, Periscope
MIL-S-24656 - Sextant, Marine (S/S By A-A-59005)
MIL-S-5807 - Sextant, Aircraft, Periscopic
This specification covers one type of periscopic sighting aircraft sextant, carrying case, and mount.
MIL-S-85018 - Second Order Attitude Reference System (Soars) An/Asn-116
The equipment conforming with this specification shall provide a compensated all attitude reference system for pitch, roll, and heading angular displacements utilizing dynamic second order erection with velocity reference and all the performance requirements described herein.
MIL-S-9390 - Sextant, Bubble, Two Power Magnification, With Variable Time Integrator, Type Ma-2
MIL-S-9391 - Sextant, Mirror Horizon, Two Power Magnification, With Variable Time Integrator, Type Ma-1
MIL-STD-1347 - Navigation Display Multicolor Microchart/Map Transparencies (S/S By Sae-As13471)
MIL-STD-1526 - Terms And Definitions For Use In Gyros
MIL-STD-1527 - Terms And Definitions For Use In Accelerometers
MIL-STD-765 - Compass Swinging, Aircraft, General Requirements For (See Notice 5 For Replacement Information)
This standard provides general requirements governing the swinging of compasses in aircraft compensation and calibration. It pertains specifically to accurate swinging of compasses in all fighter, bomber, cargo, or helicopter type aircraft utilising a standard magnetic compass.
MIL-T-18645 - Tracer, Dead-Reckoning, Mercator, Airborne An/Asa-14, Installation And Test Of
MIL-T-19576 - Transmitter, Remote Compass, Thin Wing Type Ml-1 (Unstabilized)
MIL-T-22705 - Transmitter, Altitude Data, T-624 (*) /Apn-67
MIL-T-22861 - Tactical-Navigational Display Systems (Naval Shipboard)
MIL-T-24229 - Test Set (Portable), For Repeater, Multi-Speed, 3-Channel, Navigation System
MIL-T-25193 - Transmitter, Remote Compass, Type C-2 (Unstabilized)
This specification covers one type of unstabilized remote compass transmitter type C-2.
MIL-T-25502 - True Heading Computer Group An/Aja-1
MIL-T-45277 - Transmitter, Induction Compass T-611( )/Asn
MIL-T-7955 - Tracer, Dead Reckoning, Mercator, Airborne
MIL-T-9195 - Transmitter, Inductioncompass, Stabilized, Type Mb-1
MS14173 - Controller, Ma-1 Compass (System A), (A6 Aircraft Only)
MS17048 - Weight, Sounding, Hollow Base Hexagonal (Use Mil-W-3713)
MS17168 - Reel, Sounding Leadline
MS17328 - Adapter, G-2 Compass, Compensated, Type Ma-1
MS17870 - Computer, Flight Director, Aircraft
MS17983 - Compass - Magnetic, Pilots Standby (S/S By Sae-As17983)
MS18044 - Gyroscope, Rate Switching An/Asn-52
MS18061 - Adapter, Two Channel, Roll And Pitch
MS21997 - Indicator, Repeater, G-2 Compass
MS25379 - Adapter, G-2 Compass (P-1 Automatic Pilot) Ma-1 Compass (P-1 Automatic Pilot)
MS25385 - Amplifier, Control, G-2 Compass
MS25386 - Transmitter, Remote Compass, Type G-2
MS25387 - Indicator, Directional, Master, G-2 Compass
MS26514 - Computer, Air Navigation, Dead Reckoning Type Mb-4A And, Type Cpu-26A/P
MS28011 - Sextant - Aircraft, Periscopic
MS28012 - Driftmeter, Electrically Driven, Gyro Stabilized
MS28022 - Drift Meter&Type B&5
MS28079 - Controller, S-2 Compass
MS28080 - Amplifier, Two Channel, Integral, S-2 Compass And S-5 Automatic Pilot
MS28081 - Control, Directional, Electrically Driven Gyro, S-2 Compass System
MS28082 - Amplifier, Control, Single Channel, S-2 Compass
MS28084 - Indicator, Compass Repeater, Rotating Dial, Type Mw-1
MS28094 - Indicator, Compass Repeater, Rotating Dial, Type Mw-2
MS28099 - Gyro, Directional, Roll Stabilized, Type Mf-1 Compass
MS28100 - Amplifier, Compass Servo, Type Mf-1 Compass
MS28101 - Gyro, Vertical And Mount
MS28102 - Controller, Compass, Roll Stabilized Type Mf-1 Compass
MS28103 - Interconnection Unit Compass, Roll Stabilized, Type Mf-1 Compass
MS28104 - Controller, Roll Stabilization, Type Mf-1 Compass
MS28107 - Adapter, Compensating, Ma-1 Compass System
MS90315 - Amplifier, Ma-1 Compass System A
MS90316 - Controller, Ma-1 Compass (System A)
MS90317 - Directional Gyro, Ma-1 Compass (System A)
MS90318 - Amplifier, Ma-1 Compass (System B)
MS90319 - Controller, Ma-1 Compass (System B)
MS90320 - Directional Gyro, Ma-1 Compass (System B)
QPL-17850-3 - Compass, Magnetic, Card, Pocket, Type Mc-1
QPL-17858 - Compass System, Magnetic Slaved, Directional Gyro Stabilized, 4/Hr, Type Ma-1
QPL-18033-1 - Underwater Log Equipment, Electromagnetic Type
QPL-19576-3 - Transmitter, Remote Compass, Thin Wing, Ml-1 (Unstabilized) ( No S/S Document)
QPL-19938 - Control, Directional, Electrically Driven Gyro, S-2 Compass And S-5 Automatic Pilot
QPL-19939 - Amplifier, Two Channel, Integral, S-5 Automatic Pilot, And S-2 Compass
QPL-19940-3 - Amplifier, Control, Single Channel, S-2 Compass
QPL-19941 - Controller, S-2 Compass, Type
QPL-21013-4 - Compass, Directional Reference System, Magnetic Slaved Gyro, Roll Stabilized, 3 Deg./Hr, Type Mf-1
QPL-21605 - Compass, Magnetic, Remote Slaved Gyro, Type S-2
QPL-21685-4 - Indicator, Compass Repeater, Rotating Dial, Type Mw-2
QPL-22075-17 - Indicator, Bearing-Distance-Heading Id 663D/U (Replaced By The Qualified Products Database (Qpd) See Notice 3 For Additional Information)
QPL-22165-3 - Amplifier, Compass, Servo (Type Mf-1 Compass)
QPL-22166-2 - Controller, Compass, Roll Stabilized (Type Mf-1 Compass)
QPL-22167-2 - Controller, Roll Stabilized (Type Mf-1 Compass)
QPL-22168-3 - Gyro, Directional, Roll Stabilized (Type Mf-1 Compass)
QPL-22169-2 - Gyro, Vertical And Mount (Type Mf-1 Compass)
QPL-22170-4 - Interconnecting Unit, Compass, Roll Stabilized (Type Mf-1 Compass)
QPL-25429-1 - Computer, Flight, Type Mb-8
QPL-27216-4 - Computer, Air Navigation Cpu-26/P, Dead Reckoning
QPL-27224-1 - Compass, Magnetic, Mounted Aqu-3/A
QPL-27439-2 - Computer, Performance, Multijet, General Specification For
QPL-27848-16 - Indicator, Horizontal Situation Aqu-4/A
QPL-38214-6 - Compass, Magnetic, Mounted (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5127 - Plotter, Aircraft Navigation, Type B-2
QPL-5414-5 - Computer, Air Navigation, Dead Reckoning, Type Mb-4A And Type Cpu-26A/P
QPL-5437-5 - Adapter, G-2 Compass (P-1 Automatic Pilot) Ma-1 Compass (P-1 Automatic Pilot)
QPL-5604-8 - Compass; Magnetic, P
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business